Ir al menú de navegación principal Ir al contenido principal Ir al pie de página del sitio

Implementación de Hardware In The Loop para el Análisis de Escenarios de Control de Frecuencia en una Microrred Utilizando WAMS

Hardware In The Loop Implementation for the Analysis of Frequency Control Scenarios in a Microgrid Using WAMS



Abrir | Descargar


Sección
SISTEMAS ELÉCTRICOS DE POTENCIA

Cómo citar
Implementación de Hardware In The Loop para el Análisis de Escenarios de Control de Frecuencia en una Microrred Utilizando WAMS. (2023). Revista Técnica "energía", 19(2), PP. 69-80. https://doi.org/10.37116/revistaenergia.v19.n2.2023.558

Dimensions
PlumX

Cómo citar

Implementación de Hardware In The Loop para el Análisis de Escenarios de Control de Frecuencia en una Microrred Utilizando WAMS. (2023). Revista Técnica "energía", 19(2), PP. 69-80. https://doi.org/10.37116/revistaenergia.v19.n2.2023.558

Descargar cita

Licencia
Creative Commons License

Esta obra está bajo una licencia internacional Creative Commons Atribución-NoComercial 4.0.


Artículos similares

1-10 de 96

También puede Iniciar una búsqueda de similitud avanzada para este artículo.

Artículos más leídos del mismo autor/a

El presente articulo describe la metodología para la implementación y desarrollo de un sistema con funciones de control de frecuencia de una microrred en un entorno de simulación en tiempo real. El método que se presentara en este trabajo ha sido desarrollado utilizando la simulación en el dominio en el tiempo mediante HYPERSIM que es un software para análisis de transitorios electromagnéticos con alta resolución, el paso de integración utilizado permitió obtener la respuesta de un panel solar con sus controladores e inversores conectados a una red de distribución y a una carga. La respuesta de la microrred se la integro con el sistema WAMS de CENACE mediante la conexión de un equipo PMU en la arquitectura Hardware In The Loop la cual utiliza las entradas y salidas analógicas de la simulación en tiempo real, este desarrollo analiza de forma dinámica diferentes escenarios operativos y de contingencia de la microrred, especialmente la respuesta de frecuencia ante un evento de desconexión de generación.


Visitas del artículo 807 | Visitas PDF 348


Descargas

Los datos de descarga todavía no están disponibles.
  1. S. Parhizi, H. Lotfi, A. Khodaei and S. Bahramirad, "State of the Art in Research on Microgrids: A Review," in IEEE Access, vol. 3, pp. 890-925, 2015, doi: 10.1109/ACCESS.2015.2443119.
  2. S. K. Sahoo, “Renewable and sustainable energy reviews solar photovoltaic energy progress in India: A review”, Renewable and Sustainable Energy Reviews, vol. 59. Elsevier BV, pp. 927-939, jun. 2016. doi: 10.1016/j.rser.2016.01.049.
  3. G. Lauss, M. O. Faruque, K. Schoder, C. Dufour, A. Viehweider, y J. Langston, “Characteristics and Design of Power Hardware-in-the-Loop Simulations for Electrical Power Systems”, IEEE Transactions on Industrial Electronics, vol. 63, n. º 1. Institute of Electrical and Electronics Engineers (IEEE), pp. 406-417, ene. 2016. doi: 10.1109/tie.2015.2464308.
  4. C. Dufour, Z. Soghomonian, y W. Li, “Hardware-in-the-Loop Testing of Modern On-Board Power Systems Using Digital Twins”, 2018 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM). IEEE, jun. 2018. doi: 10.1109/speedam.2018.8445302
  5. P. M. Menghal and A. J. Laxmi, “Real time simulation: Recent progress & challenges,” proc. Int. Conf. Power, Signals, Control. Comput., pp. 1-6., 2012
  6. W. D. T. Berry, A. R. Daniels, “Real time simulation of power system transient behaviour,” Proc. 3rd Int. Conf. Power Syst. Monit. Control, pp. 122–127, 1991.
  7. M. O. Faruque et al., “Real-Time Simulation Technologies for Power Systems Design, Testing, and Analysis,” IEEE Power Energy Technol. Syst. J., vol. 2, no. 2, pp. 63–73, 2015.
  8. J. Wu, Y. Cheng, A. K. Srivastava, N. N. Schulz, and H. L. Ginn, “Hardware in the Loop test for power system modeling and simulation,” 2006 IEEE PES Power Syst. Conf. Expo. PSCE 2006 - Proc., pp. 1892–1897, 2006.
  9. G. F. Lauss, M. O. Faruque, K. Schoder, C. Dufour, A. Viehweider, and J. Langston, “Characteristics and design of power hardware-in-The-loop simulations for electrical power systems,” IEEE Trans. Ind. Electron., vol. 63, no. 1, pp. 406–417, 2016.
  10. H. Haes Alhelou, A. Y. Abdelaziz, y P. Siano, Eds., Wide Area Power Systems Stability, Protection, and Security. Springer International Publishing, 2021. doi: 10.1007/978-3-030-54275-7.
  11. X. Xie and Y. Xin, “WAMS Applicatios in Chinese Power Systems”, IEEE power & energy magazine, 2006.
  12. T. Kerdphol, F. S. Rahman, M. Watanabe, Y. Mitani, D. Turschner y H.-P. Beck, "Enhanced Virtual Inertia Control Based on Derivative Technique to Emulate Simultaneous Inertia and Damping Properties for Microgrid Frequency Regulation", IEEE Access, vol. 7, pp. 14422–14433, 2019
  13. M. Amin, S. Member, A. Al-durra, and W. Elmannai, “Experimental Validation of High Performance HIL-based Real-time PMU Model for WAMS,” vol. 9994, no. c, 2020.
Sistema OJS 3.4.0.9 - Metabiblioteca |