Análisis de los factores que intervienen en el envejecimiento prematuro de las baterías de ion-litio mediante modelo teórico validado en laboratorio

Hugo Pico; Iván Pazmiño; Bernardo  Ponce

doi:10.37116/revistaenergia.v17.n2.2021.432

Analysis of the factors involved in the premature aging of lithium-ion batteries using a theoretical model validated in the laboratory

Análisis de los factores que intervienen en el envejecimiento prematuro de las baterías de ion-litio mediante modelo teórico validado en laboratorio

Published 2021-01-27

https://doi.org/10.37116/revistaenergia.v17.n2.2021.432

Open | Download

PDF (Spanish) FLIP XML (Spanish) HTML (Spanish)

Issue

Vol. 17 No. 2 (2021): Revista Técnica "energía", Edición No. 17, ISSUE II

Section

EFICIENCIA ENERGÉTICA

How to Cite

Analysis of the factors involved in the premature aging of lithium-ion batteries using a theoretical model validated in the laboratory. (2021). Revista Técnica "energía", 17(2), PP. 83-91. https://doi.org/10.37116/revistaenergia.v17.n2.2021.432

DOI

https://doi.org/10.37116/revistaenergia.v17.n2.2021.432

Dimensions

PlumX

How to Cite

Analysis of the factors involved in the premature aging of lithium-ion batteries using a theoretical model validated in the laboratory. (2021). Revista Técnica "energía", 17(2), PP. 83-91. https://doi.org/10.37116/revistaenergia.v17.n2.2021.432

Download Citation

license

Hugo Pico

CNEL EP

https://orcid.org/0000-0003-4603-3003

Iván Pazmiño

Perfil Google Scholar

Bernardo Ponce

Perfil Google Scholar

Show authors biography

Most read articles by the same author(s)

Iván Pazmiño, Anghelo Moreira , Juan Carlos Intriago, Marcos Ponce, Milton Moreano, Comparative Analysis of the Extractable Energy Potential between Fixed Photovoltaic Panels and with an Axis Tracking System Installed at the ULEAM. , Revista Técnica "energía": Vol. 20 No. 2 (2024): Revista Técnica "energía", Edición No. 20, ISSUE II

Lithium-ion batteries, simulations, theoretical model, premature aging of cells.

This article presents a quantitative analysis of the variables that affect the premature aging of lithium-ion batteries.

For this purpose, first the validation of a theoretical model developed in Matlab-Simulink is carried out by comparing the behavior of its parameters of interest with respect to a real system implemented in the laboratory. For this, parameters such as the characteristics of the cells and the environmental conditions are considered in both cases.

Subsequently, once the simulation tool has been validated, load and unload cycles are performed on the model implemented in Matlab-Simulink. As part of the process, tests are carried out considering different temperatures, charge / discharge rates, and different discharge depths, with the aim of determining the impact of these parameters on the useful life of lithium-ion batteries.

The final section of the document presents the results of the experiment where, among other aspects, the influence of ambient temperature on the deterioration of lithium-ion batteries, as well as the impact of a charge / discharge process of cells studied with high levels of electrical current.

Article visits 1333 | PDF visits 807

Downloads

Download data is not yet available.

[1] A. A. Abdullah Al-Karakchi, G. Putrus and R. Das, "Smart EV charging profiles to extend battery life," 2017 52nd International Universities Power Engineering Conference (UPEC), Heraklion, 2017, pp. 1-4, doi: 10.1109/UPEC.2017.8231961.
[2] "IEEE Guide for the Characterization and Evaluation of Lithium-Based Batteries in Stationary Applications," in IEEE Std 1679.1-2017 , vol., no., pp.1-47, 31 Jan. 2018, doi: 10.1109/IEEESTD.2018.8262521.
[3] C. Galatsopoulos, S. Papadopoulou, C. Ziogou, D. Trigkas, C. Yfoulis and S. Voutetakis, "Non-Linear Model Predictive Control for Preventing Premature Aging in Battery Energy Storage System," 2018 UKACC 12th International Conference on Control (CONTROL), Sheffield, 2018, pp. 174-179, doi: 10.1109/CONTROL.2018.8516720.
[4] P. M. Torres, “Analysis and Desing Considerations of an Electric Vehicle Powertrain regarding Energy Efficiency and Magnetic Field Exposure,” Ph.D. thesis, Departamento de Ingeniería Eléctrica, Universidad Politécnica de Madrid., España, 2016.
[5] M. Plaza, “Estudio y modelado de la respuesta dinámica de baterías electroquímicas destinadas a las aplicaciones estacionarias” Ph.D. tesis, Departamento de Ingeniería Eléctrica, Universidad Carlos III de Madrid, España, 2015.
[6] J. Vélez, “Desarrollo de electrodos y electrolito para baterías solidas de ión litio en lámina delgada obtenido por sol-gel,” Ph.D. tesis, Departamento de Química Inorganica, Universidad Carlos III de Madrid, España, 2015.
[7] J. Miranda, N. Iglesias, "Las infraestructuras de recarga y el despegue del vehículo eléctrico," Observatorio Medioambiental, vol. 18, pp. 57-85, 2015, doi: https://doi.org/10.5209/rev_OBMD.2015.v18.51285.
[8] J. González, "El vehículo eléctrico y la integración de las renovables en el sistema eléctrico," Fundación de la energía de la comunidad de Madrid, Madrid, Guía M.10.820-2015, 2015.
[9] M. A. Hannan et al., "A Review of Internet of Energy Based Building Energy Management Systems: Issues and Recommendations," in IEEE Access, vol. 6, pp. 38997-39014, 2018, doi: 10.1109/ACCESS.2018.2852811.
[10] M. A. Boukhal, I. Lagrat and O. Elbannay, "Implementation of a lithium-ion battery state of charge estimation algorithm for BMS on the real time target NI myRio," 2019 International Conference on Wireless Technologies, Embedded and Intelligent Systems (WITS), Fez, Morocco, 2019, pp. 1-5, doi: 10.1109/WITS.2019.8723849.
[11] Catalog No. SLPB100255255HR2, SLPB 55Ah High Power Superior Lithium Polymer Battety, Kokam Co., Ltd, South Korea.
[12] C. Lyu et al., "A research of thermal coupling model for lithium-ion battery under low-temperature conditions," 2017 Prognostics and System Health Management Conference (PHM-Harbin), Harbin, 2017, pp. 1-5, doi: 10.1109/PHM.2017.8079131.
[13] J. Wang, P. Liu, J. Hicks-Garner, E. Sherman, S. Soukiazian, M. Verbrugge, H. Tataria, J. Musser, P. Finamore, "Cycle-life model for graphite-LiFePO4 cells," 2011, Journal of Power Sources, pp. 3942-3948, doi: doi.org/10.1016/j.jpowsour.2010.11.134.
[14] I. Recio, “Desarrollo e implementación de una metodología de ensayos para medida de la capacidad y estudio del envejecimiento en baterías de NiMH e ion-litio,” MCs. tesis, Departamento de Ingeniería Eléctrica, Universidad Politécnica de Madrid., España, 2016.
[15] J. R. Arribas, P. M. Lafoz, “Sistemas de potencia y de almacenamiento en vehículos eléctricos (MUIE)”, PhD., Departamento de Ingeniería Eléctrica, Universidad Politécnica de Madrid, España,2018.