Multilevel inverter D-STATCOM for reducing total harmonic distortion in a non-linear loads electrical distribution system
Main Article Content
Abstract
The paper presents the D-STATCOM Multilevel Cascade Inverter model is implemented by basing the control on the Synchronous Reference Frame strategy to reduce the current total harmonic distortion. This current harmonic distortion is produced by the presence of a nonlinear load connected to the analysis bus. The harmonic content of the network is evaluated before and after implementing the compensation, with ranges of connection and disconnection times of the compensator, in order to differentiate between distorted waveforms and perfect sine waves and establish the performance of the strategy.
To carry out the development, simulation and analysis of the results of this research, the MATLAB and Simulink platform will be used.
Downloads
Article Details
Aviso de Derechos de Autor
La Revista Técnica "energía" está bajo licencia internacional Creative Commons Reconocimiento-NoComercial 4.0.
References
[2] P. Bapaiah, “Power Quality Improvement by using DSTATCOM,” vol. 2, no. 4, pp. 1–12, 2013.
[3] R. Pandey, R. Nath Tripathi, and T. Hanamoto, “Comprehensive Analysis of LCL FilterInterfaced Cascaded H-Bridge MultilevelInverter-Based DSTATCOM.pdf.” 2017.
[4] P. M. Saradva, K. T. Kadivar, M. H. Pandya, and A. J. Rana, “Application of D-STATCOM to control power flow in distribution line,” 2016 Int. Conf. Energy Effic. Technol. Sustain. ICEETS 2016, pp. 479–484, 2016, doi: 10.1109/ICEETS.2016.7583802.
[5] K. T. Maheswari, R. Bharanikumar, V. Arjun, R. Amrish, and M. Bhuvanesh, “A comprehensive review on cascaded H-bridge multilevel inverter for medium voltage high power applications,” Mater. Today Proc., vol. 45, pp. 2666–2670, 2021, doi: 10.1016/j.matpr.2020.11.519.
[6] J. A. Araque Gallardo, J. L. Diaz Rodriguez, and A. P. Garcia, “THD optimization of a single phase cascaded multilevel converter using PSO technique,” 2013 Power Electron. Power Qual. Appl. PEPQA 2013 - Proc., no. November 2017, 2013, doi: 10.1109/PEPQA.2013.6614944.
[7] Sujono, I. Sudiharto, and O. A. Qudsi, “Application of D-STATCOM to reduce unbalanced load using synchronous reference frame theory,” EECCIS 2020 - 2020 10th Electr. Power, Electron. Commun. Control. Informatics Semin., no. 3, pp. 65–70, 2020, doi: 10.1109/EECCIS49483.2020.9263476.
[8] M. Montufar, W. Pavón, M. Jaramillo, and S. Simani, “Control Strategy Applied to Smart Photovoltaic Inverters for Reactive Power Exchange Through Volt-Var Control to Improve Voltage Quality in Electrical Distribution Networks,” in Smart Innovation, Systems and Technologies, 2022, vol. 252, pp. 357–366, doi: 10.1007/978-981-16-4126-8_33.
[9] Abdullah M. Noman; Abdullrahman A. Al-Shamma’a;Khaled E. Addoweesh;Ayman A. Alabduljabbar and Abdulrahman I. Alolah, “Cascaded Multilevel Inverteter Topology.pdf.” 11 April 2018, 2018.
[10] S. Maurya, D. Mishra, K. Singh, A. K. Mishra, and Y. Pandey, “An Efficient Technique to reduce Total Harmonics Distortion in Cascaded H- Bridge Multilevel Inverter,” Proc. 2019 3rd IEEE Int. Conf. Electr. Comput. Commun. Technol. ICECCT 2019, pp. 1–5, 2019, doi: 10.1109/ICECCT.2019.8869424.
[11] S. Pinzón and W. Pavón, “Diseño de Sistemas de Control Basados en el Análisis del Dominio en Frecuencia,” Rev. Técnica “Energía,” vol. 15, no. 2, pp. 76–82, 2019, doi: 10.37116/revistaenergia.v15.n2.2019.380.
[12] X.-P. Zhang and Z. Yan, “Energy Quality: A Definition,” IEEE Open Access J. Power Energy, vol. 7, no. July, pp. 430–440, 2020, doi: 10.1109/oajpe.2020.3029767.
[13] H. Andrei, P. C. Andrei, L. M. Constantinescu, R. Beloiu, E. Cazacu, and M. Stanculescu, “Electrical power systems,” Power Syst., vol. 2, pp. 3–47, 2017, doi: 10.1007/978-3-319-51118-4_1.
[14] V. R. Kota and S. Vinnakoti, “SRF-based control of unified power quality conditioner for power quality enhancement,” Int. Conf. Electr. Electron. Signals, Commun. Optim. EESCO 2018, no. January, 2018, doi: 10.1109/EESCO.2015.7253768.
[15] W. Rohouma, R. S. Balog, A. A. Peerzada, and M. M. Begovic, “D-STATCOM for harmonic mitigation in low voltage distribution network with high penetration of nonlinear loads,” Renew. Energy, vol. 145, pp. 1449–1464, 2020, doi: 10.1016/j.renene.2019.05.134.
[16] P. E. Melin et al., “Analysis and control strategy for a current-source based D-STATCOM towards minimum losses,” Int. J. Electr. Power Energy Syst., vol. 116, no. September 2019, p. 105532, 2020, doi: 10.1016/j.ijepes.2019.105532.
[17] J. C. Mendoza-Niebles, L. D. Pabon-Fernandez, E. A. Caicedo-Peñaranda, A. Pardo-García, and J. L. Díaz-Rodríguez, “Control síncrono de potencia de un D-STATCOM de bajo costo,” Aibi Rev. Investig. Adm. e Ing., vol. 8, no. 3, pp. 108–117, 2020, doi: 10.15649/2346030x.881.
[18] S. Choudhury, P. Bhowmik, and P. K. Rout, “Economic load sharing in a D-STATCOM Integrated Islanded Microgrid based on Fuzzy Logic and Seeker Optimization Approach,” Sustain. Cities Soc., vol. 37, no. September 2017, pp. 57–69, 2018, doi: 10.1016/j.scs.2017.11.004.