Skip to main navigation menu Skip to main content Skip to site footer

Diseño e Implementación del Sistema de Control de un Inversor Multinivel de Fuentes Independientes, por medio de Modulación Vectorial Espacial

Diseño e Implementación del Sistema de Control de un Inversor Multinivel de Fuentes Independientes, por medio de Modulación Vectorial Espacial




Section
TECNOLÓGICOS E INNOVACIÓN

How to Cite
Diseño e Implementación del Sistema de Control de un Inversor Multinivel de Fuentes Independientes, por medio de Modulación Vectorial Espacial. (2014). Revista Técnica "energía", 10(1), PP. 151-158. https://doi.org/10.37116/revistaenergia.v10.n1.2014.110

Dimensions
PlumX

How to Cite

Diseño e Implementación del Sistema de Control de un Inversor Multinivel de Fuentes Independientes, por medio de Modulación Vectorial Espacial. (2014). Revista Técnica "energía", 10(1), PP. 151-158. https://doi.org/10.37116/revistaenergia.v10.n1.2014.110

Download Citation

J. Galarza
F. Quizhpi

Similar Articles

1-10 of 48

You may also start an advanced similarity search for this article.

This study shows the steps to be taken to implement a multilevel inverter control system. The study is based on the topology of independent sources used, and later describes implementation of the algorithm with geometric considerations used, and the monitoring and protection systems in an FPGA-based board. In the end, it presents results for start-up of the entire system, with the voltage and frequency measurements obtained at the inverter output, and the THD in the current and load voltage, which was around 7% of the resistive load, and less than 3% in an induction motor.


Article visits 446 | PDF visits 521


Downloads

Download data is not yet available.
Sistema OJS 3.4.0.9 - Metabiblioteca |